JAMMA Extension with kick harness support. Is there interest?

[Arcade-Projects]

I designed my own JAMMA extension setup. The prototypes just arrived. I'm wondering if I should order more and offer them for sale?

• A HAS/Minigun style kick harness port is included on each end.
• The power channels use a molex mini fit jr 8 pin connector
  
  • GND (3 pins)
  • 5 Volts (3 pins)
  • 12 Volts (1 pin)
  • -5 Volts (1 pin)
• Audio uses a 1/8 inch TPS (GND, Audio+, Audio-)
• Video uses a DE-15 (VGA)
• Everything else uses a HPDB50 (50 pin SCSI 2)

My idea for using SCSI 2, VGA and 1/8 TPS ports was to make it easy to buy pre-made cables of whatever length was required. The power cable is not off the shelf. I was able to get some power cables made by a seller on aliexpress for a reasonable price.

If I do sell these I think I would either sell bare PCBs or assembled PCBs. The buyer would need to source the cables themselves.

arcade-projects.com/forums/ind…da6dc38f2300f0608c8d107e9arcade-projects.com/forums/ind…da6dc38f2300f0608c8d107e9arcade-projects.com/forums/ind…da6dc38f2300f0608c8d107e9

Let me know if you are interested.

More...