External SSD not showing up

[/RaspberryPi]

Hello!
I have this M.2 SSD (for laptops) which I use as an external SSD with a proper rack. Connecting it via USB to any laptop will work just fine, but seems like connecting it to the raspberry pi 4 (raspbian lite) does not show in lsblk. The only place where it shows up is in lsusb as Bus 002 Device 002: ID 152d:0562 JMicron Technology Corp. / JMicron USA Technology Corp. JMS567 SATA 6Gb/s bridge
I took a look in dmesg and I get this weird error: [ 5620.869948] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 5620.891071] usb 2-2: New USB device found, idVendor=152d, idProduct=0562, bcdDevice= 2.09 [ 5620.891104] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5620.891121] usb 2-2: Product: JMS583 [ 5620.891135] usb 2-2: Manufacturer: JMicron [ 5620.891149] usb 2-2: SerialNumber: DD564198838A6 [ 5620.906350] scsi host0: uas [ 5620.910235] scsi 0:0:0:0: Direct-Access GIGABYTE GP-GM30512G 0209 PQ: 0 ANSI: 6 [ 5620.996925] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5630.935939] sd 0:0:0:0: [sda] Spinning up disk... [ 5634.134035] ................not responding... [ 5745.988055] sd 0:0:0:0: [sda] Read Capacity(16) failed: Result: hostbyte=0x00 driverbyte=DRIVER_OK [ 5745.988091] sd 0:0:0:0: [sda] Sense Key : 0x2 [current] [ 5745.988107] sd 0:0:0:0: [sda] ASC=0x4 ASCQ=0x1 [ 5751.988104] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=DRIVER_OK [ 5751.988141] sd 0:0:0:0: [sda] Sense Key : 0x2 [current] [ 5751.988157] sd 0:0:0:0: [sda] ASC=0x4 ASCQ=0x1 [ 5751.988978] sd 0:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B) [ 5751.988997] sd 0:0:0:0: [sda] 0-byte physical blocks [ 5757.989232] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled [ 5759.989231] sd 0:0:0:0: [sda] Asking for cache data failed [ 5759.989263] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5766.023363] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (0 bytes) Any idea what should I do?

submitted by /u/cipopescu
[link] [comments]

More...