RGB MOD Pelco monitors help please..

[Arcade-Projects]

Cross posting from shmups
shmups.system11.org/viewtopic.…=56155&p=1387754#p1387754



Hello guys.. complete newbie to mod.. Syntax helped me with the newbie questions over PM...

I am looking to RGB MOD my Pelco monitors.. Bellow are pictures of one of the units chassis and the one that i will be using for testing (the screen has a scratch, F-up during shipping on this one).. I would like to use SCART on the monitors.. Please take a look at the pictures and let me know what is the best to go about it...If rising the legs on the RGB-in line on the jungle chip is best or somewhere else..

also -
Please recommend a link to buy wires, resistors and caps and scart pin head connector etc..


Pelco PMC21A TDA8842 S1
https://drive.google.com/drive/folders/ ... IzzBQ1kdBq

"All you need is 75R resistors and 100n caps and your done.

3 wires RGBS with resistors to ground and caps inline
1 wire blanking with resistor to ground
1 wire sync
2 wires audio
1 wire ground. "

More...