Code by: @Arthrimus
PCB by: @Frank_fjs
arcade-projects.com/forums/ind…6e36121c02bb15d367d3b8061arcade-projects.com/forums/ind…6e36121c02bb15d367d3b8061
Features:
- Full button remapping.
- Autofire with 6 selectable rates from fastest to slowest.
- Settings are saved and stored.
- Status LED which flashes upon first powering on and lights when in either button remapping or autofire selection mode. The LED flashes during the button remapping mode to indicate how many times a button has been pressed.
- Simultaneously hold any two face buttons + START for 3 seconds to enter button remapping mode. The LED will light and remain lit once successfully in remapping mode:
- Press the button you wish to register as input 1 once (LED flashes once).
- Press the button you wish to register as input 2 twice (LED flashes twice).
- Press the button you wish to register as input 3 three times (LED flashes three times).
- Press the button you wish to register as input 4 four times (LED flashes four times).
- Press the button you wish to register as input 5 five times (LED flashes five times).
- Press the button you wish to register as input 6 six times. (LED flashes six times).
- Press START once remapping is completed to exit remapping mode and return to normal operation. The LED will turn off.
- Simultaneously hold any one face button + START for 3 seconds to enter autofire assignment mode. The LED will light and remain lit once successfully in autofire mode:
- Press the button(s) you wish to enable autofire on.
- One press results in the fastest rate of autofire being applied, two presses is a level slower, all the way through to six presses for the slowest rate of autofire.
- Press START once autofire assignment is completed to exit autofire mode and return to normal operation. The LED will turn off.
DOWNLOAD: arcade-projects.com/forums/ind…6e36121c02bb15d367d3b8061
More...