Troubleshooting help
- /RaspberryPi
- Corporate
- Posts: 2449
- Joined: Wed Jun 05, 2019 1:29 am
Troubleshooting help
Any troubleshooting help would be appreciated.
I built a simpsonstv type build based on this tutorial (https://withrow.io/simpsons-tv-build-guide-waveshare) Its all working fine, but I'm getting very staticy sound from the audio. These are the things I've tried so far with no change. Googling around it sounds like its a fairly common problem but wanted to see if anybody had any ideas. What i could try for troubleshooting next?
1.) checked all solder connections and wire diagrams
2.) tried different speaker, tried different potentiometer and tried removing potentiometer from circuit.
3.) tried different video/audio files
4.) tried different power supply (currently using https://www.amazon.com/dp/B00MARDJZ4?psc=1&ref=ppx_yo2ov_dt_b_product_details) static seems slightly better (hard to tell) when i run my pi off a usb port from my pc, maybe its a grounding issue with that power supply
submitted by /u/thegrumpyfish
[link] [comments]
Source: https://www.reddit.com/r/raspberry_pi/c ... ting_help/
/RaspberryPi