Sega JVS I/O Power Cables

Image
For all Supergun and Consolized motherboard discussion.

Post Reply
Arcade-Projects
Corporate
Posts: 5926
Joined: Tue Jun 04, 2019 11:43 pm

Sega JVS I/O Power Cables

Post by Arcade-Projects »

ATX-2-Sega I/O Power Cable

Price will be $25

This high-quality, hand-crimped power cable will allow you to use your ATX power supply to power your Sega JVS Type 1, 1.5, 2 or 3 I/O pcbs. It uses one of the standard 4-pin molex connectors that would normally power a HDD in a PC to power your Sega I/O. The other ends terminate in a 4-pin NH connector for 5v and a 5-pin NH connector for 12v. These are the proper connectors Sega used to power the I/Os. Standard cable length is 40cm.

Image




SUN PSU 3rd Connector-2-Sega I/O Power cable

Price will be $25

This adapter is made to plug directly into the third 8-pin power connector most SUN PSUs have. It's very convenient to avoid multiple PSUs for your Sega setup.

Image

More...
Post Reply

Return to “Modified Moderboards”