Argon mini fan starts at 55°C but never stops

[/RaspberryPi]

Hey fellas,

I got myself an argon mini fan for the raspberry pi4, It´s working fine with the pwm mode, it starts at 55°C but when it cools down, it doesn´t stop.

Instruction says I have to sudo nano /boot/config.txt and then put in the line

dtoverlay=gpio-fan,gpiopin18,temp=55000

and thats it. Doesn´t it need a second line where it stops the fan below 55°C? I´m not good at coding, maybe someone can help me here.
submitted by /u/Olli_Ohh
[link] [comments]

Source: https://www.reddit.com/r/raspberry_pi/c ... ver_stops/