 |
Hi folks, I got myself a MVS-1c a few months ago, plus the Neobiomasta 1.7 (with UniBios 4.0) and the OMVS kit and wanted to start diving into the world of Neo Geo. Ergo, I assembled all the components, desoldered the old bios and soldered everything else in place. Today the 161 in 1 card arrived and should be tested immediately. Card and controller plugged in, turned on the power and nothing happens. I only get artifacts on the screen (see pictures). Every now and then, after switching off and on several times, the color of the artifact changes (magenta) or I get a white screen. The 161 in 1 is a series 2 card. Could someone possibly tell me what I did wrong or where the error lies! Thank you and greetings DocSn0w https://preview.redd.it/3otonc4c9tu91.j ... p&f283c6ab https://preview.redd.it/mwe56c4c9tu91.j ... p&c1bbcfca https://preview.redd.it/xtjige4c9tu91.j ... p&3e0e2708 submitted by /u/DocSn0w [link] [comments] |
More...